Cruise control issue

[SUP3RST4R_DJ]

I might even try finding a decent second hand stalk at the wreckers and see if it works

 

[Mavericks Choice]

Common problem the whole stalk moves each time the indicators are used putting pressure on the Cruise harness/contacts eventually they break & cruise fails.
New stalk will fix the problem.

 

[Surfwagon]

Look like most of you I thought I could live with the intermittent working and not working but as I use the CC every time I go up the Pacific Hwy to visit my daughter and her family it becomes frustrating turning it off/on and wiggling just hoping the next time it will activate.
Save your selves the frustration and just buy a new stalk.

 

[SUP3RST4R_DJ]

I'll try and price one up at holden

 

[poolkeeper]

I think I have the same problem.
This only started to happen once I put new driveshafts in though, I didnt hit the sensor there, and its all clean too

I cant remember as I rarely drive car... but does the dash say the cruise is "on", once you press the button. Then "engaged" when you twist the stalk down?

 

[Shorty33]

PoolKeeper - yes

 

[one_and_only2004]

Mine turned out to be the abs module - swapped it out for a second hander and happy days