diff gears

[gtrboyy]

All 6cyl vl had 3.45,last of vk b/w had 3.23 iirc...only need the gears not 25 spline centre,just check like Immortality posted above.

We used to get 3.9/4.11 gears out of pintara's & 3.7 from 4cyl cortina's

Lots of different cars had b/w diffs


If buying new there basically 2 brands available one of which has a few complaints about noise.

 

[EYY]

And can’t get Dana gears anymore apparently - was told they were bought out by another co not too long ago.

Just need to be careful with centres when shopping around - the irs centres have circlip grooves to retain the axles.

I assume it’s okay to use an irs centre in the live axle housing but not the other way around?

 

[murray sutherland]

thanks guys for the info. it has a solid diff and I am pretty sure it is standard. I have herd about pintara wagon diffs, I will ring around a few diff or gear suppliers and will let you know how I go
thanks again
muz

 

[losh1971]

Will these gears fit a VR ute with LSD?

https://www.gumtree.com.au/s-ad/burnie/engine-engine-parts-transmission/lsd-diff-centre-3-45-gears-and-axles/1227801217

 

[Immortality]

Looks like an 0575 gear set so yes they should fit fine.

 

[losh1971]

Looks like an 0575 gear set so yes they should fit fine.

Great thanks for that M8. I now just need to get hold of the seller as she is not responding to the email and its been a couple of days. I don't want to miss out on these if i can help it. They are a rare find in Tas, especially at 100 bucks.

 

[gtrboyy]

Yep those will work then try to sell off that 25 spline lsd centre for same coin...over here that be sold first hour it comes up.

 

[losh1971]

Missed out on those I linked from Gumtree. I sent her some messages and finally was told they had sold. Having real issues finding a VL for wrecking, very scarce.

 

[losh1971]

I have found another VL diff, trouble is he wants $350 for the complete unit. I'm wondering if that is a lot? And if I could sell anything off it on eBay once I remove the gears?

 

[losh1971]

I have one other place to get a diff centre from. He wants $250 without axles. It's out of a sedan, am I right in saying this one should be no problems, I don't know if it's an auto or manual diff. Are the gears are the same anyway?