hyjinx
New Member
- Joined
- Jun 5, 2015
- Messages
- 8
- Reaction score
- 2
- Points
- 3
- Age
- 61
- Location
- Adelaide
- Members Ride
- 2008 VE Calais V International
Hi guys, my first thread, hope you can help...
I have completed installation of the lsXtreme VE E1 HSV Gauge Wiring Harness.
I have plugged the Binnacle gauge pod in and except for a small blip on the gauges when I first turned the ignition on the gauges are not operating.
No Voltage meter showing, no Illumination when lights turned on.
I bought the gauges and saw them working in the previous owners car.
I have triple checked the connections, all are soldered.
Any suggestions. Fuses ?
Is it because my car is a V6?
The rest of the car is working fine...
The gauges are from a E1 Senator and my car is a S1 Calais V6. Both 2007.
Can I put a multi-meter across the harness plug terminals and see some voltage/output.
Does anything need to be programmed?
I have attached pic of gauges working in previous owners E1.
Thanks
Hans
I have completed installation of the lsXtreme VE E1 HSV Gauge Wiring Harness.
I have plugged the Binnacle gauge pod in and except for a small blip on the gauges when I first turned the ignition on the gauges are not operating.
No Voltage meter showing, no Illumination when lights turned on.
I bought the gauges and saw them working in the previous owners car.
I have triple checked the connections, all are soldered.
Any suggestions. Fuses ?
Is it because my car is a V6?
The rest of the car is working fine...
The gauges are from a E1 Senator and my car is a S1 Calais V6. Both 2007.
Can I put a multi-meter across the harness plug terminals and see some voltage/output.
Does anything need to be programmed?
I have attached pic of gauges working in previous owners E1.
Thanks
Hans