Blakvsexec
New Member
- Joined
- Mar 22, 2010
- Messages
- 177
- Reaction score
- 1
- Points
- 0
- Members Ride
- 5.0L VS EXECUTIVE
I am about to pull down the engine in my ute for the rebuild before the turbo goes on and i have come up with a way to fix the low oil flow/pressure problem to the rear of the engine that these v6's have.
I am going to run another oil feed line down to the rear plate from the oil filter housing and feed it into the gallery in the back of the engine via the rear plate, This should fix the low flow/pressure issues that they are prone to have.
I'll post up pics and a write up when i do it.
Has anyone else bothered to do this or does everyone just increase the oil pressure by using the stronger relief valve spring ?????
I am going to run another oil feed line down to the rear plate from the oil filter housing and feed it into the gallery in the back of the engine via the rear plate, This should fix the low flow/pressure issues that they are prone to have.
I'll post up pics and a write up when i do it.
Has anyone else bothered to do this or does everyone just increase the oil pressure by using the stronger relief valve spring ?????