EGR and Intake Manifold

[MrMang3058]

Edit: Mine is the one on the right

Okay so I have gone thru two egrs due to snapping the pipe after I realised the pipe isn't actually long enough my manifold is the series two I believe cause the thread where you attach the EGR pipe is up higher so my question is.
Is there anyway to modify the manifold or the EGR pipe to connect the two together

 

[Lex]

Edit: Mine the one on the right

Okay so I have gone thru two egrs due to snapping the pipe after I realised the pipe isn't actually long enough my manifold is the series two I believe cause the thread where you attach the EGR pipe is up higher so my question is.
Is there anyway to modify the manifold or the EGR pipe to connect the two together

Where is the rest of it?

 

[MrMang3058]

Where is the rest of it?

The EGR is in the car was gunna swap the manifolds over but won't work cause different y piece. But I tried take the manifold off attaching it too the EGR and putting it on won't work need to be like 50mm longer

 

[Lex]

The EGR is in the car was gunna swap the manifolds over but won't work cause different y piece. But I tried take the manifold off attaching it too the EGR and putting it on won't work need to be like 50mm longer

Whats yours s1 or 2?

 

[MrMang3058]

Whats yours s1 or 2?

I'm pretty sure series 2

 

[Lex]

I'm pretty sure series 2

Then you will probably need one from a vt, vx, or vy s1.
I was told there was a difference between vy s1 & 2.

 

[ephect]

VZ alloytec may not be at all compatible with ecotec egr pipes.

No idea but maybe best to get a the correct manifolds or raid the wreckers for a longer one to suit the lower positioned erg.

 

[Fu Manchu]

100% not compatible with VZ
This thread needs to be moved to VY.

 

[MrMang3058]

100% not compatible with VZ
This thread needs to be moved to VY.

oh **** my bad thought it was vy