eurovox to pioneer!

[nghie]

hey guys. I'm tinkering about with my new head deck, and i just can't get the Bugger to work! Basically, I've connected accessory to yellow on the loom, batt twelve v to nothing, dimmer to brown black, and constant to yellow red. Is there something terribly wrong with this? Thanks! Dan.

 

[m1lky]

Possibly a silly question but have you grounded it?

 

[kcpwns]

+1 for checking earth...also check you haven't blown a fuse?

 

[nghie]

I joined the Ground from the Pioneer to ground on the loom. No go?

 

[kcpwns]

yeah you should connect it to the ground of the old headunit?
is there a fuse in the back of the new headunit?

 

[nghie]

Yup. It's not broken though. I'm really quite clueless.

http://www.justcommodores.com.au/temp/wiring.htm

That's what I followed.

 

[kizza50]

12v to nothing?!! Go to red with that and see

 

[jesse_lankey]

possibly constant to the batt 12v? i think this will also save your settings

 

[VNVacationer]

If its a VN the original loom colours were,

Yellow = accessories
Orange/White = to fuse
Black/White = to ground
Yellow/Red = Power antenna signal

plus the unit itself was grounded have you done that as well

 

[kcpwns]

I dunno man :s
I havent much experience with your models wiring...hopefully someone else can help out..
all i can suggest is double check your connections?