MartyK
Member
- Joined
- Dec 13, 2010
- Messages
- 48
- Reaction score
- 3
- Points
- 8
- Age
- 51
- Location
- Dayboro
- Members Ride
- Holden Commodore VT
I could be wrong here. I jacked up the car to get a good look underneath but was blocked by loads of other components which restricted me from being able to see clearly.
It seems that where the exhaust is bolted into the engine a lot of smoke is coming out. Makes me think maybe a gasket problem?
I have tried to tighten the inner nut and outer nut as tight as I can which has made no different. think it is leaking a little oil as it is quite moist round the edges... lol.
Thought I would ask you guys as you will no doubt know what you are talking about.
How easy a job is this to do by myself? Am I correct it would need some replacement parts and if so, what parts and what would be the procedure of replacing those parts?
I have attached some images and a video to this post to give you an indication as to what I am talking about.
Video here: https://www.sendspace.com/file/tu2m3r
You should be able to see the smoke on the video.
It seems that where the exhaust is bolted into the engine a lot of smoke is coming out. Makes me think maybe a gasket problem?
I have tried to tighten the inner nut and outer nut as tight as I can which has made no different. think it is leaking a little oil as it is quite moist round the edges... lol.
Thought I would ask you guys as you will no doubt know what you are talking about.
How easy a job is this to do by myself? Am I correct it would need some replacement parts and if so, what parts and what would be the procedure of replacing those parts?
I have attached some images and a video to this post to give you an indication as to what I am talking about.
Video here: https://www.sendspace.com/file/tu2m3r
You should be able to see the smoke on the video.