Fuse issue

[lout]

if you post up wiring diagram from kenwood and every connection you have made to which colour wire in vx i will have a look

 

[sprinter1221]

if you post up wiring diagram from kenwood and every connection you have made to which colour wire in vx i will have a look

Okay no worries this is what I connected as shown on a YouTube video it's called vt/vx headunit wiring colours.
To power the unit
Constant orange/Black to yellow
Accessories yellow to red
Ground black/white to black
Then it was just the speakers

 

[lout]

what about the outputs
you may have burnt out the pre amp

 

[lout]

sorry, lust read your original post, you have multiple fuses without power, is that correct?

 

[sprinter1221]

sorry, lust read your original post, you have multiple fuses without power, is that correct?

Yes 4 fuses are out
The illumination light for the dash lights at night only speedo and gears hitter light up
Ciggi lighter
7.5amp radio fuse
And front and rear wiper fuse
Have had circuit tester on with car ignition on and car running aswell all 4 showed up no power at all after replacing them aswell all other fuses all good

 

[lout]

what works on your car
indicators
park lights
remote door lock/unlock ,make sure window is down first

 

[lout]

just pulled up a wiring diagram
looks like the acc circuit from your ignition barrel switch has failed
this is the plastic switch attached to the barrel, not the metal key part

 

[lout]

 

[sprinter1221]

View attachment 262177

So do you reckon replace the ignition switch?
Everything besides radio ciggy lighter and wipers work... and that night-time dash lights..
Car locks window go up and down etc headlights taillights...
Just tested wiper again and works on ignition but once started doesn't work

 

[lout]

i would chuck a multimeter on the brown wire at ignition switch
should have 12v on accessory and ignition, but not on crank or lock