Welcome to Just Commodores, a site specifically designed for all people who share the same passion as yourself.

New Posts Contact us

Just Commodores Forum Community

It takes just a moment to join our fantastic community

Register

having problems starting car vr

angel84

New Member
Joined
Apr 12, 2010
Messages
8
Reaction score
0
Points
0
Location
maitland
Members Ride
97 vs commodore
hi all
having problems with starting the car ive replaced the starter motor
the problems is still happening sometimes its starts sometimes it wont when it dosnt i dont even get a click all i get its the reds on the dash its a vr commodore
 

zskinner

Member
Joined
Jan 2, 2009
Messages
290
Reaction score
4
Points
18
Location
Brisbane
Members Ride
WN CalaisV 6.0L
it could be many many things, but one thing that comes to mind is the relays in the engine bay can become dirty, so maybe try taking the relays out and cleaning them (or swap over a working relay like the one from your horn or something), and make sure the wires are pretruding upward enough so when you put the relay back in it definately gets a good connection. good luck with it. actually second thought if your getting errors up on your dash then you can probably do an error check and it may tell you whats wrong.......
 

PRAVX II S

Member
Joined
Jan 21, 2010
Messages
918
Reaction score
8
Points
18
Location
Australia
Members Ride
Commodore
Check for codes bridge pins 5&6
It could be the key/BCM. Not talking properly.
If it is auto could be inhibitor switch. Play with the gears up and down.
 
Top