HDT_aero
Banned
- Joined
- May 3, 2005
- Messages
- 1,285
- Reaction score
- 11
- Points
- 0
- Age
- 38
- Location
- SA
- Members Ride
- manual VN aero
The titles slightly miss leading i currently have a s1 v6 with a burnt exhaust valve on cyl no 4
now ive purchased my self a complete top end off a low k vp so what i am wondering is if i take .020 off the heads (will cost me $55) and from what the machine shop says that wont cause me any issues fitting the manifold... will i run into any problems with the stock rods not allowing the valves to close completely?
any other feedback on this situation either for or against is appreciated
now ive purchased my self a complete top end off a low k vp so what i am wondering is if i take .020 off the heads (will cost me $55) and from what the machine shop says that wont cause me any issues fitting the manifold... will i run into any problems with the stock rods not allowing the valves to close completely?
any other feedback on this situation either for or against is appreciated