Raze96
New Member
- Joined
- May 18, 2021
- Messages
- 2
- Reaction score
- 0
- Points
- 1
- Age
- 27
- Location
- New zealand
- Members Ride
- VZ holden executive
I have a 2005 holden executive
I had a problem where my alternator charging cable had broken off, since then I grabbed a battery cable and just ran a like straight for the alternator to the battery and that fixed my problems.
Couple weeks later I'm now in my work carpark with a dead battery and a error code as reads
C0800
Raw code: 4800
ECU: ABS/EBCM/ESC
Status: History DTC
Holden: Device power #1 (low current #1) circuit malfunction; Device Power 1 Circuit Voltage Below Threshold; Device Power 1 Circuit Voltage Above Threshold; Device Power 1 Circuit High Resistance; Control Module Power Circuit High Input
General Electrical Failures
Can anyone make sense of this?
I had a problem where my alternator charging cable had broken off, since then I grabbed a battery cable and just ran a like straight for the alternator to the battery and that fixed my problems.
Couple weeks later I'm now in my work carpark with a dead battery and a error code as reads
C0800
Raw code: 4800
ECU: ABS/EBCM/ESC
Status: History DTC
Holden: Device power #1 (low current #1) circuit malfunction; Device Power 1 Circuit Voltage Below Threshold; Device Power 1 Circuit Voltage Above Threshold; Device Power 1 Circuit High Resistance; Control Module Power Circuit High Input
General Electrical Failures
Can anyone make sense of this?