spauldj308
S Pack Man
- Joined
- Oct 2, 2005
- Messages
- 230
- Reaction score
- 3
- Points
- 18
- Age
- 36
- Location
- Hobart, TAS
- Members Ride
- VR S sedan 5L, VSII ute
Had a bit of a tinker tonight.
Ignore the botch job with the plastic, its only a mark one template, this stuff isn't as strong as i thought it was, and it flexes a bit.
The original plan was to mount it flush with the face of the console, then fix it in place and smooth the lot over with body filler, then paint it. Similar in setup to this;
But as a play around, I pushed it back at an angle, as has been done before;
Undecided. Opinions?
Ignore the botch job with the plastic, its only a mark one template, this stuff isn't as strong as i thought it was, and it flexes a bit.
The original plan was to mount it flush with the face of the console, then fix it in place and smooth the lot over with body filler, then paint it. Similar in setup to this;
But as a play around, I pushed it back at an angle, as has been done before;
Undecided. Opinions?