Laser
New Member
Hi guys,
Just finished painting the engine bay and will be putting in the k frame and my newly built engine in.
I pulled out my K frame nearly 2 years ago and cant remember if a rubber spacer or anything, goes between the K frame and the Chassis/body (where the four bolts go).
Thanks.
VK sedan, 308, VN EFI Heads, Edelbrock RPM Air Gap dual plane manifold and Pacemaker Tri Y's.
Lunati cam 219,229@50 and 0.520 lift
Crow Valve springs to suit over .500" lift and 290lb on the lobe. Part number 4828-16
YT Adjustable roller rockers
Just finished painting the engine bay and will be putting in the k frame and my newly built engine in.
I pulled out my K frame nearly 2 years ago and cant remember if a rubber spacer or anything, goes between the K frame and the Chassis/body (where the four bolts go).
Thanks.
VK sedan, 308, VN EFI Heads, Edelbrock RPM Air Gap dual plane manifold and Pacemaker Tri Y's.
Lunati cam 219,229@50 and 0.520 lift
Crow Valve springs to suit over .500" lift and 290lb on the lobe. Part number 4828-16
YT Adjustable roller rockers
Last edited: