Multiple Memcals?

[Immortality]

there is a guy here in NZ who does dual eeprom memcals that you can switch

Holden Information - Torque Performance "We Talk Results"
Holden (VN-VT) - Torque Performance "We Talk Results"

but again, why. get a good tune and it's sorted. the above is only good if you want one tune for 91 and another for say 95 or 98. but a good tune on 95/98 should be fine.

my SV3800 tune does better for economy on 95 then the factory tune did on 91:thumbsup:

 

[hakhawk]

interesting, hes got resistors for the limp home chips. would love to get some high res pics of these so i can do the same, thus negating the need for finding stock memcals. design pcb, get a ****eload printed up, buy plug, socket and resistors in bulk, easy done. only thing it doesnt have is the knock board.

 

[mouce]

Okay, research time. Cheers.

@Paradox: No need for a pedal restricter, just need to get a better tune so that I use less fuel to go just as hard. OR...use the same amount of fuel and go a little bit harder

 

[delcowizzid]

kalmaker realtime boards use resistors too the old boards used to use one of the chips found under the knock filter and a heap of resisters check out the pic on the kalmaker website for resistor colours.

 

[jacomms]

still trying to get 2,3 & 4 gang switching going guys??? it is really simple...just let me know.

 

[delcowizzid]

check out the datasheet for the chip you are using should tell you everything you need to know about what pin switch eprom addresses its real easy ill try find my wiring diagram for rotary switch connection for you.

 

[delcowizzid]

still looking for 4 bin switcher see my thread over here has all you need to know http://delcohacking.net/forums/viewtopic.php?f=11&t=56