hey mate how did you go wiring this up? ive been thinking of doing it for my footwells and puddle lights, but i can only find the one that has those gay plugs on them, from my understanding you would nearly have to re wire them back to the strip right? that way you can also cut it to length? i could only find these ones:
you get a remote with it little one that goes on your keys to switch modes, and you conect the LEDs via small usb to the control box wich you will see in the link and then i hard wired the control box to the 12V Accesorie in my Center Console.
Dont think ill be puting a kit on it unless i find a decent one at a good price
Yep still active next "mod" is im going to try and sound deaden the boot, to help with the cabin drone, aperintly if you sound deaden the boot should help "block" the dron from getting inside the cabin so i give that a shot
Also
If you peaple like my ride and have facebook if youse have time please vote for my car on the following link
What deadening are you using? I'm also looking in to doing it. In the states there is a really cheap alternative called peel n seal but I can't find it in Aus.
wel im gona start with some DynaGrip Ruberised under coating its a spray and drys up like a rubber its supose to stop sound from entering the cabin, if that dont work ill aslo put in "DBkill" they seem ok and not toooo expensive on ebay they got 1.95 Square meter $100 so ill see how i go, the spray is only $20 a can so ill try that first