The best kind of dyno is the drivers face when he hits the loud pedal haha
Cheers mate, I love VH's and just had to finally go out and buy one.
How much work mechanically/legally was there to get that donk between the rails?
Yup its a bit of work to get the motor to fit you can buy a chev kit to fit them involves spacers between the cross member and body, move the starter motor to other side of block remote filter set up after market sump and oil pick up, then you cant run the big chev HEI dissy unless you cut out the fire wall a bit, and i think if you run power stering you need a spacer for the steering colum. with the 400 Trans a little panel beating on the trans tunnel and some spacers under the cross member. You also have to run electric fans as with the spacers the motor sits quite high and you need a drop base filter unless you cut a hold in the bonnet.
This is the second 350 Commodore ive had and it easy to get cheap power out of one.
as im in new Zealand there fairly easy to get legal just got to get mounts and driveshaft checked out by enginer for certifacation and your on the road, dont know if it would be as easy in Oz.