MY10 sv6 ABS and stability control faults

[DECIMATOR]

Hi there my sv6 has about 57000 ks on the clock and a stability control and ABS fault flashed up. Any ideas?

 

[GTS-Replica]

Take it back to holden i would.

 

[Illusivedreams]

One of your abs sensor is cactus in my opinion.

Unpkug them one by one just to check its not jsut the connections are full of water . With the current weather it would not suprise me.

 

[DECIMATOR]

Where do I do that? I'm a noob when it comes to ABS

 

[UFO]

Where do I do that? I'm a noob when it comes to ABS

In that case do not pass go do not collect $200, go directly to Holden.

(dont stuff around with stuff you dont understand, especially safety stuff)

 

[RiCeY]

Flashed up and went away? Once or keeps happening? More info....

 

[DECIMATOR]

Flashed up until I turned the car off, then it went away. Happened twice. It didn't come up yesterday.

 

[RiCeY]

Could be debris on the rear wheel speed sensor/s. Cant clean them yourself as the driveshaft has to be removed from the hub to gain access etc.

Need to see what codes are logged to know for sure.

 

[*uwishn*]

i thought Holden would have fixed this problem since every second vt and vx had this problem!

 

[RiCeY]

Totally different setup and problem. VEs suffer from debris sticking to the encoder ring on the smooth surface on the back of the wheel bearing that the sensor reads off. Earlier commodores had the toothed ring next to the diff that the sensor read off which either had dirt fill the gaps up between the teeth or dirt in between the teeth and the sensor or the wrong spacing between sensor and wheel.