okaayy then, yet ANOTHER problem with this car. everytime i do something i find another problem, how convenient.
so i've started painting it, all i have left is the drivers door, and the rear passenger door (Which was bogged, and the trolley strip ripped off a nice section of the bog, which had rust underneath it... -.- )
But thats not really an issue.. did my front passanger door.. the top door pin was a bit of a hassle, ended up getting it out though, but i (or maybe not, maybe thats why the pin was such a pain in the ass to remove..) bent the mount.. (on the door) which i later worked out after i'd put the door back on and couldn't get the pin through the top part of the hinge.. tried moving the door up and down while hitting the pin, didnt work, the door won't up or down at all.. when its nearly closed, its noticably dropped probably about 2cm from the back, the top corner of the door hits the plastic between the two doors on its way to closing.. how would we suggest i get this pin in? i was thinking maybe take the bottom pin out.. pull the door up untill i can hit the pin in, and the hope the bottom hinges will line up.. good or bad idea? Cheers.
Ohh yeah, shearer. my door pins cost me $8.50 each >.< and the bumper clips were like 22 or 28 each(for the individual clip that goes onto the body of the car...) bloody rediculous.