Faynt11
Feeder of Trolls
- Joined
- Jul 28, 2008
- Messages
- 207
- Reaction score
- 2
- Points
- 0
- Location
- Sydney
- Members Ride
- 07' VE SV6 Ute
you can use fine filler over paint, that's its intended purpose, the other bog should only be used on bare metal. however i've used it on paint before and didn't run into problems. if you're putting bog over paint a quick buzz with p240 will do the trick and a hand sand in the dent for good measure. getting pinholes is mostly from the way you're mixing it up. try not to fold the bog over itself to much when mixing if you know what i mean. also it could be the way its being applied to the panel. filling pinholes can be annoying, try blowing the area of first the 'pulling' the fine filler in from at least 2 different directions, this should help push the air out that's trapped inside. even try applying it with a single sided razor blade one at a time. oh and yes bogging over hifill is fine provided it's fine filler.