zskinner
Member
- Joined
- Jan 2, 2009
- Messages
- 290
- Reaction score
- 4
- Points
- 18
- Location
- Brisbane
- Members Ride
- WN CalaisV 6.0L
hey so ive just installed a new memcal into my vp, but it feels like there is a bloody stage 2 cam in it now lol, when cruising the car lunges forward, then holds back, then lunges forward, then holds back, then lunges forward, then holds back. i also noticed the temp guage sits a fair bit higher than it used to before i installed the new memcal. i thought maybe i hadnt installed it properly so as a test i took the memcal out all together to see what happened but it just made the car not want to start at all, so the memcal must be connected ok because it starts fine when i put the memcal back in? i also tried putting the old one back in and the car goes good again, just goes **** when i swap it back over to the new memcal. it is particularly really bad at low speeds and idling at traffic lights, seems like its about to stall when idling. i also tried resetting the ecu by disconnecting the battery for about half an hour but that didnt help. is there such thing as a dud memcal? lol