Getthebook
New Member
- Joined
- Mar 11, 2019
- Messages
- 10
- Reaction score
- 5
- Points
- 3
- Age
- 55
- Location
- Melbourne
- Members Ride
- Vs Commodore UTE series 2 3.8 v6
I have VS ute 3.8 v6 factory air. When I purchased it was told the a/c was working but had stopped. A/c currently does not engage but I think it’s out of gas anyway
I found the wire to the compressor ( 1 wire) was broken so proceeded to re solder on to resolve the issue
Still nothing and the fans run as soon as you turn ignition on hot or cold
Reading another forum as suggested I replaced the ECU sensor in the thermostat thinking this may sort out but still the fans run
I have tested computer with pin 5 and 6 and it comes up with 12 no errors
I have no current to the a/c compressor but was told due to no gas it would not switch on
Checked all fuses and relays
Lost where to look next. Your help would be greatly appreciated
I found the wire to the compressor ( 1 wire) was broken so proceeded to re solder on to resolve the issue
Still nothing and the fans run as soon as you turn ignition on hot or cold
Reading another forum as suggested I replaced the ECU sensor in the thermostat thinking this may sort out but still the fans run
I have tested computer with pin 5 and 6 and it comes up with 12 no errors
I have no current to the a/c compressor but was told due to no gas it would not switch on
Checked all fuses and relays
Lost where to look next. Your help would be greatly appreciated