Torque settings for front caster bushing on a standard vz Commodore

[Forkboy78]

Does anyone know the torque setting for front caster bushing on vz Commodore I recently done mine and torque wrench 24nu the torque wrench only went to 24nu anyway then it's foot pound per square inch if that's how it's said

 

[Fu Manchu]

Front Control arm nut is 148 Nm.
Control arm insulating bush is 23Nm
Control arm ball joint 60Nm
Control Arm inner pivot bolt 100Nm

Best I can find for you.

 

[99notout]

 

[Forkboy78]

Front Control arm nut is 148 Nm.
Control arm insulating bush is 23Nm
Control arm ball joint 60Nm
Control Arm inner pivot bolt 100Nm

Best I can find for you.

Front

Front Control arm nut is 148 Nm.
Control arm insulating bush is 23Nm
Control arm ball joint 60Nm
Control Arm inner pivot bolt 100Nm

Best I can find for you.

View attachment 205324

The front control arm nut is that the caster bush at the front with big bolt...thankyou for your help so far

 

[Forkboy78]

View attachment 205324

Thankyou for the help so far...do you know if the front control arm

View attachment 205324

thankyou for help 99notout do you know which one is the big caster bush at the front of the car

 

[99notout]

Pictures speak more clearly...

 

[Forkboy78]

Pictures speak more clearly...

View attachment 205331 View attachment 205332 View attachment 205333

Thankyou for the help 99notout after reading all that info I'm pretty sure I have work

Pictures speak more clearly...

View attachment 205331 View attachment 205332 View attachment 205333

Thankyou for the help 99notout after reading all that info I'm pretty sure I have worked out which one is the caster bush bolt

 

[Forkboy78]

Thankyou for helping everyone much appreciated

 

[Forkboy78]

But one more question I've had a wheel alignment done after replacing bushes if I tightened the caster bush bolt at the font of car to 148nm would that throw the wheel alignment out

 

[vc commodore]

But one more question I've had a wheel alignment done after replacing bushes if I tightened the caster bush bolt at the font of car to 148nm would that throw the wheel alignment out

No....And all the caster rod bushes I have replaced and ones I have had to undo if they are adjustable, never once have a grabbed for the torque wrench....I actually use a shifter......Never had a problem and I do alignments for a crust