Hi
I have a 7 pin plug.
Following this thread I have been able to determine
TRAILER >>>>> COMMODORE
1 left hand turn - yellow >>>> Light Blue = L/H turn signal
2 reverse - black >>>> Light Green = Reverse light
3 earth - white >>>>
4 right hand turn - green >>>> Blue wire = R/H turn signal
5 brakes - blue >>>> Blue/red wire = Brake lights
6 stop - red >>>>
7 tail, clearance, side markers - brown >>>> Brown wire = Taillights
What do I connect the PIN 6 STOP (RED) and PIN 3 EARTH (WHITE) to in the VS please.
I am using terminal clamps to piggy back the wiring onto the tail light wiring.
Just can't seem to find the last two connections.
Thanks
ZP