Welcome to Just Commodores, a site specifically designed for all people who share the same passion as yourself.

New Posts Contact us

Just Commodores Forum Community

It takes just a moment to join our fantastic community

Register

turning a vc commodore to a vk lookalike

H

hdt_077

Guest
hey guys my son and i are working on his vc commodore and when we brought it, it already had the vk bumper and tail lights.We brought a vh commie for the front guards and bonnet and when we went to put the vh guards on the vc commodore but discoverd that where the headlights sit are different to the vh commie.So my question is can we still turn the car into a vk with a little bit of cutting or is there another way to do it.
All response in regards to this project will help heaps thanks.
 

SL/ENUT

The SL/E Fanatic!
Joined
May 28, 2004
Messages
1,982
Reaction score
91
Points
48
Age
38
Location
Burnie, Tasmania
Members Ride
VB SL/E 5L
use VH/VK headlights, thats all you need.
 
H

hdt_077

Guest
cheers for your reponse on my topic SL/ENUT,so i dont have to cut any of the indicator framework on the VC commie to fit VK guards and lights is that right
 

1vngal

New Member
Joined
Feb 6, 2006
Messages
1,682
Reaction score
25
Points
0
Age
33
Location
North Tassie
Members Ride
'Ruby' 1991 VN Exec & '98 Proton M21 Coupe
My ex had a VB with a VH front end on it. The only problem that had was the bonnet was a little hard to open. Whether the clowns that did the conversion, didn't line it up right, or whether there needs to be some sort of modification, I don't know....

Just something to keep in mind.
 

greenfoam

New Member
Joined
Jan 13, 2005
Messages
7,902
Reaction score
125
Points
0
Age
99
Members Ride
VP Executive R-spec
I believe you do need to do some slight cutting to fit the bigger lights! the reason I say this is because I've seen and read a how-to on the net before, unless that was keeping the VB bits and just going to the bigger lights, I can't remember perfectly. Also 1vngal, the bonnets are a bit different
 
Top