V6 lifters, do they fit L98

[losh1971]

As the title says are the V6 lifters same as L98 lifters?

 

[woteva]

Yes, but you will be a few short....

 

[EYY]

Buick, ls, 304, ecotec roller lifters are generally interchangeable

 

[losh1971]

All good I have decided to flog them. I need a kit if they were to go in an L98. Might as well buy a set with other thing needed for L98 if I eventually get a 6L ute.

 

[Deuce]

Buick, ls, 304, ecotec roller lifters are generally interchangeable

Same as twin-cam and M8 harley engines too.
Just check your oil entry height on the body.

 

[vs-lover]

I've still got that set of lifters that I've fully cleaned out which came out of my lads Ecotec. I may end up returning them back into service and pull out those Asian lifters that suffer from leak down over night and clack in the morning.

 

[Fachoo]

cleaned old lifters can wear the cam lobes if they don"t match in wear, best throw them in the metal recycle bin, your choice to use

 

[harrop.senator]

cleaned old lifters can wear the cam lobes if they don"t match in wear, best throw them in the metal recycle bin, your choice to use

I've never had the issue with roller cams . Flat tappet , definitely not.

 

[vs-lover]

I've never had the issue with roller cams .

Yes I agree, I don't don't see an issue with a roller cam stuff either.

Well anyway each one would go back into the hole it came out as I've kept them in order.