Sorry to hijack the thread, was thinking of doing similar, but putting an sv6 exhaust on my omega. Has anyone done this? Reason for asking is the plastic garnish that sits above the exhaust (the black bit), will need to be modified, and was wondering if it is as simple as popping it off (if this is even possible) and replacing with an SV6 garnish. Also, would exhaust mounts need to be put down the left side of the car, since it currently only has the factory exhaust on the RHS. Just so everyone understands what I mean, the garnish bit I am talking about is the black bit with reflectors on it in the photo i found below.
Yeah, looks like with:
2 Rubber Exhaust Mounts (22674119)
1 Rear Exhaust bracket. (92066860)
1 Left Hand heat shield. (92219526)
1 Diff double exhaust hanger (92066857)
SSV Lower bar inset (92108015)
Which should come to $118 for the parts needed, plus the cost of the SS exhaust, which aint too bad
Thinking of doing the same thing to my Omega. So thanks for the advise and part #s. I will be purchasing the SS bumper though. I like everything looking genuine GM =)
I also like the look of those groove bits coming off the wheel arches that you don't get with the stocky meega bars. XD