1989mitty
New Member
- Joined
- Jul 19, 2009
- Messages
- 69
- Reaction score
- 1
- Points
- 0
- Members Ride
- VE sv6 ute
The wiring for the triple guages is not hard to wire in.
There is a plug under the drivers side trim that has 4 of the 5 wires needed the only other one is a illumination from the headlamp switch.
Its not sensors you have to wire up all the inputs are on a system called GMLAN a network that the car runs on and its just + and -.
This is why you can just activate the screen on the v6 to display these, there are already there for diagnostics.
With the guages there is a "SIC" module this isolates the "Temp" "Pressure" and "Volts" signal and than converts it to the scale of the triple guages.
There is a plug under the drivers side trim that has 4 of the 5 wires needed the only other one is a illumination from the headlamp switch.
Its not sensors you have to wire up all the inputs are on a system called GMLAN a network that the car runs on and its just + and -.
This is why you can just activate the screen on the v6 to display these, there are already there for diagnostics.
With the guages there is a "SIC" module this isolates the "Temp" "Pressure" and "Volts" signal and than converts it to the scale of the triple guages.