central3
New Member
I have just brought a Brembo front brake upgrade kit (calipers and rotors). The plan was to fit these to my series 2 SS and leave the rears stock thinking that this would be the same set up as fitted to the Series 1 Redline (i.e. Brembo rotors/calipers on the front and GMH rotors/calipers on the rear).
What I did not realise was that my S2 SS rotors are smaller than that fitted to the S1 Redline (i.e. 324 mm versus 360 mm). So now I am thinking that I need to upgrade my rear set up as well.
Question 1. Has anyone run a Brembo front set-up with a 324 mm rear?
Question 2. If I do upgrade both the front and rear (probably with Cadillac CTS rear calipers) will I have trouble with my stock master cylinder?
Any advice would be appreciated
What I did not realise was that my S2 SS rotors are smaller than that fitted to the S1 Redline (i.e. 324 mm versus 360 mm). So now I am thinking that I need to upgrade my rear set up as well.
Question 1. Has anyone run a Brembo front set-up with a 324 mm rear?
Question 2. If I do upgrade both the front and rear (probably with Cadillac CTS rear calipers) will I have trouble with my stock master cylinder?
Any advice would be appreciated