duaned
Active Member
- Joined
- Dec 1, 2013
- Messages
- 491
- Reaction score
- 188
- Points
- 43
- Age
- 52
- Location
- Newcastle NSW
- Members Ride
- M6 Red Hot MSE
No it does not.Any idea about an ssvr wagon?
Welcome to Just Commodores, a site specifically designed for all people who share the same passion as yourself.
No it does not.Any idea about an ssvr wagon?
So I won't have the high level inputs or accessory feed? Pity a sub would be nice, might have to limit it to factory speaker upgrades and hope it produces a richer soundNo it does not.
No Adjustments on the amp. I added a new amp and 12 inch boxed subwoofer. Kept the original amps and speakers too. Sounds much better.Has anyone got any pictures of the stock (non-bose) amplifier in the VF2? I'm curious if it has any gain controls or anything like that.
I have the "Bass" setting cranked on the headunit Tune settings, but the subs are barely moving.
Don't really wanna start pulling the car apart just to check for myself.
how did you do this? I want to do similar, I want to add or replace the factory amp with an aftermarket and sub. Nothing fancy just extra bass and factory look.No Adjustments on the amp. I added a new amp and 12 inch boxed subwoofer. Kept the original amps and speakers too. Sounds much better.
I located the the rear speaker input to the amp and ran to another amp which drives the single subwoofer. Battery power is in the boot. Plus the trigger is in the existing amp.how did you do this? I want to do similar, I want to add or replace the factory amp with an aftermarket and sub. Nothing fancy just extra bass and factory look.
Ok so you took the speaker wires from the rear speakers and connected those to the new amp? Does that mean your original amp does nothing now? And then connected the new amp to the sub? And powered the amp to the battery (as in boot already). Do you have any photos?I located the the rear speaker input to the amp and ran to another amp which drives the single subwoofer. Battery power is in the boot. Plus the trigger is in the existing amp.