Just Commodores Forum Community

It takes just a moment to join our fantastic community

Register

Vl injectors wont work any ideas

Discussion in 'VL Holden Commodore (1986 - 1988)' started by Sescam94, Jun 26, 2012.

  1. Sescam94

    Sescam94 New Member

    Messages:
    16
    Likes Received:
    0
    Trophy Points:
    0
    Joined:
    Mar 24, 2012
    Location:
    Sydney
    Members Ride:
    Vt stroker twin turbo
    My 86 vl turbo is not starting so i took the rail off and turned it over but the injectors wasnt spraying any fuel is there a fuse for them or anything i hooked one directly to power and it started spraying so if anyone knows can you please let me know asap
     
  2. Lazza78

    Lazza78 Banned

    Messages:
    80
    Likes Received:
    0
    Trophy Points:
    0
    Joined:
    Nov 5, 2009
    Location:
    SE bris
    Members Ride:
    VT HBD LS1, VL calais project
    are your fuel pumps working ?? thats where i would be checking first mate
     
  3. Sescam94

    Sescam94 New Member

    Messages:
    16
    Likes Received:
    0
    Trophy Points:
    0
    Joined:
    Mar 24, 2012
    Location:
    Sydney
    Members Ride:
    Vt stroker twin turbo
    well fuel is being pump to the rail and it has fuel pressure i just played with that fuse thing near the battery and it sprayed fuel once but that was it still wont start
     
  4. muffman001

    muffman001 New Member

    Messages:
    170
    Likes Received:
    0
    Trophy Points:
    0
    Joined:
    Mar 7, 2005
    Location:
    Whyalla ..
    Members Ride:
    VL Berlina soon to be turbo'd
    Remove the resistor in the wiring loom after the battery terminals
     
  5. Sescam94

    Sescam94 New Member

    Messages:
    16
    Likes Received:
    0
    Trophy Points:
    0
    Joined:
    Mar 24, 2012
    Location:
    Sydney
    Members Ride:
    Vt stroker twin turbo
    ok ill give that a try thanks
     
  6. pricey3682

    pricey3682 New Member

    Messages:
    53
    Likes Received:
    0
    Trophy Points:
    0
    Joined:
    Jun 5, 2012
    Location:
    Sydney
    Members Ride:
    1986 VL Calais
    Underneath your intake manifold there's is a big (orange I think) plug that goes to the injectors. Unplug it, blow it out and see how it goes.

    Could also be that the ecu isn't sending info to the injectors telling them when to inject fuel. If you can get your hands on some "noid" lights that will tell you if the injectors are getting sent a pulse.
     

Share This Page