andrewcutter212
New Member
- Joined
- Oct 26, 2011
- Messages
- 22
- Reaction score
- 0
- Points
- 0
- Age
- 37
- Location
- Perth Australia
- Members Ride
- VN Group A Replica
Hi guys i have removed my VN series 2 auto gearbox and torq converter and flywheel and everything off. and with the picture u see below this
is what i have left... I have a VN series 2 manual gearbox etc Can you please tell me what i need to do next.. Where do i insert the spigot bush or what do i have to take off before i can put the spigot bush on and how do i go about i as i am soo confused
Please help as the VN AUTO TO MANUAL CONVERSION page has got me stumped.
THe picture below is where the flywheel bolts on... PLEASE HELP!
i have taken everything off and i am not to sure what to do now
Keep in considering i have a VN SERIES 2 that im converting to manual ... With a VN SERIES 2 MANUAL TRANSMISSIon
is what i have left... I have a VN series 2 manual gearbox etc Can you please tell me what i need to do next.. Where do i insert the spigot bush or what do i have to take off before i can put the spigot bush on and how do i go about i as i am soo confused
Please help as the VN AUTO TO MANUAL CONVERSION page has got me stumped.
THe picture below is where the flywheel bolts on... PLEASE HELP!
i have taken everything off and i am not to sure what to do now
Keep in considering i have a VN SERIES 2 that im converting to manual ... With a VN SERIES 2 MANUAL TRANSMISSIon
Last edited: