VR SS Manual Cruise Control Problem!!!

[mectec]

Have i installed all correct parts for the crusie control to work. For some reason it wont turn on... but i do get a click from the bcm when i hit on... also nothing is coming up on the cluster like CRS or ON.

I have installed.

*New BCM and from a VR Clubsport
*Module and bracket in engine bay
*Brake and clutch switch
*Stalk for cruise
All the plug were there i just connected them.

Is there a relay under dash or under bonnet that i might be missing...

Cheers..

 

[Chirpstr]

I think the computer plays a part in this and having a manual ecm it wont let you enable cruise control.

 

[Chirpstr]

You could try splicing and running a white wire from the cruise module (under hood) straight to the violet/white coming from the speed sensor (on the gear box)....again spliced as well.
Good Luck.


Edit: actually according the wiring diagram you already have one running to the speed sensor from the module (green wire) connect that to white.

 

[hako]

You also need a relay for the fuse/relay panel under the steering wheel. Note- this is on VS....I presume VR would be identical.

 

[ethann]

Does this mean once I put my manual conversion in my stato the cruise won't work?

 

[Fekason]

BCM Change Not Needed!

Hi,

The cruise control is independent of the BCM, so you did not have to change the BCM.

Cheers.

 

[vpbt1ss]

have u had the cruise actiuvated with a scan tool for your BCM? and have u installed the bulbs in the dash cluster ?

 

[VrWagz1]

first problem maybe that the crs light bulb is blown. 2nd, make sure things like the switches are ok and adjusted right and your brake light bulbs arnt blown. And i think there is a relay under the dash somwhere i beleive that may need installing.