VS temp gauge signal wire

[Rusty17]

Hey dus any 1 no wut colour wire the temp gauge signal wire is and wuts the other wire coming out of the sensor??

 

[db_notso]

need to know which motor and then i can check a wiring diagram for you!~

 

[Rusty17]

Its a ecotech 3.8L in a vs

 

[db_notso]

okay hang on
crap that wiring diagram is on my laptop give me 5 minutes okay?

 

[Rusty17]

Ok thanx

 

[db_notso]

coolant temp sensor
connector ye106
yellow wire goes to power train control module
othe wire goes to ground internally in ecu as a reference
why do you need this info?
i am assuming from my diagram it has two wires coming out of it?
so signal wire to ecu is yellow and the

 

[Rusty17]

Jus need to know what wire to hook up to temp gauge as old dash has been ripped out as its a burnout car.... And dont know what colour wire is the temp signal behind the dash...

 

[db_notso]

temp signal at the instrument plug? at dash the one i gave you is at the sensor hang on i will look up ipc wiring

 

[db_notso]

in my diagram it says that it is part of the signals sent and recieved from ecm (engine module)
for a burnout car you may be better off just running a wire from the sensor or buying a gauge with a sender (temp are pretty cheap)

 

[Rusty17]

But i got old sensor plugged in and jus wanna no wut colour the signal is behind the dash so i can jus plug it in, already got a elec temp gauge...