96wags99
New Member
- Joined
- Nov 5, 2023
- Messages
- 3
- Reaction score
- 1
- Points
- 3
- Age
- 24
- Location
- Brisbane
- Members Ride
- 5 Speed VS Wagon
Hi, I am having a bit of an issue with my wagon.
Few days back while driving to work I had a random check engine light come on(car still drove fine) same thing on the way home.
Next day it was idling between 1500-2000 continuously. Even when in gear(T5 Manual) you can feel the car pulling like it would have a sticky throttle, push clutch in and revs would be 1500-2000rpm.
Turned it on and off a few times and it ended up not idling at all, it would end up stalling at lights ect.
Noticed it had a manifold oil leak so I changed manifold gaskets over the weekend, along with a brand new IACV and 3 different TPS.
Got the car scanned today and it came up with 3 codes
32 - Mass airflow out of range
54- System voltage unstable
57 - Injector voltage minor fault.
So I've tried two different MAF sensors, both pulled apart and thoroughly cleaned.
Also checked for vacuum leaks from manifold and vacuum lines, still with no avail.
Hoping someone is able to point me in the right direction for some other things to try.
Thanks in advance
Have a solid week ahead legends!
Few days back while driving to work I had a random check engine light come on(car still drove fine) same thing on the way home.
Next day it was idling between 1500-2000 continuously. Even when in gear(T5 Manual) you can feel the car pulling like it would have a sticky throttle, push clutch in and revs would be 1500-2000rpm.
Turned it on and off a few times and it ended up not idling at all, it would end up stalling at lights ect.
Noticed it had a manifold oil leak so I changed manifold gaskets over the weekend, along with a brand new IACV and 3 different TPS.
Got the car scanned today and it came up with 3 codes
32 - Mass airflow out of range
54- System voltage unstable
57 - Injector voltage minor fault.
So I've tried two different MAF sensors, both pulled apart and thoroughly cleaned.
Also checked for vacuum leaks from manifold and vacuum lines, still with no avail.
Hoping someone is able to point me in the right direction for some other things to try.
Thanks in advance
Have a solid week ahead legends!