VT Changing Speaker System

[Noy]

You can install as much speakers as you want, but dont expect much bass without a amp.

 

[AwaKen]

Pocket fell out

My pocket keeps jumping out when i took the faceplate off the headunit should i go back to wow sigh and sound and get em to fix it?

or should the pocket come out ? feels like its too long for that spot

 

[wrx884]

na u just needa adjust ur HU just needs 2 come down at the back of the HU 2 push the pocket down

 

[AwaKen]

how would i go about doing that? dont they bolt the headunit in there?

 

[wrx884]

they shouldnt have in a VT but 4 some stupid reason ppl do but if its not u just gotta take the pocket out and pull down on the back of the unit try not 2 move the front if u can as it usually shows the metal frame in between the gaps if u do if it wont budge u may need 2 use ur HU removal tools 2 free it up a bit

 

[Car Audio Factory Outlet]

Fusion EN-SW12ES 12" 400W Car Subwoofer $89.00
Aerpro SB12100 12" Sealed Sub Box $44.95
Fusion EN-FR653 6" 200W 3 Way Car Speakers $53.00
Fusion EN-CMST1 6" 3 Way Component Car Speakers $134.00
Fusion EN-AM3002 300W 2 Ch Car Amplifier $134.00
Total: $454.95

Hows that lookin?

http://www.ryda.com.au/Aerpro-Holden-Commodore-Vt-Vx-Wiring-Harness-p/ap1784h.htm

is that the adaptor people are talking about? so i dont have to mess with the wires?

Are there any cables i'd need to buy too? Or do they come with the speakers/amp ?

THe harness is fine, though do remember that you are going to need to splice it into the OEM harness

We have one that fits you HU to OEM --- they are one of our stock items

Also I would go something else than Fusion!

Try here

As for your SUB - you do realise it is only a SVC!

PS - you should be using a mono.

CHeers

 

[AwaKen]

Thanks, thats the kinda feedback im after, as i dont have to much of a clue

Do i _need_ 6in splits in the front? just they cost a bit more.. and the installations double the cost of the 6inch

what sort of sub should i get then? cheap wise.. im not after anything fance, just want it to sound better then stock

also.. with the door panels, is there anyway you can make it so you can "see" the speakers? just for the visual side of things

PS: got the old stock HU (tape/cd) if anyone wants its up for grabs, just pay the postage or pick it up (QLD/Kallangur)

 

[vtsuperchargedboy]

re to your amp question, in most cases its bolted in the boot to the back of the seat. some ppl bolt it to the sub box i suggest you don't do that

 

[Heffer_Slayer]

Thanks, thats the kinda feedback im after, as i dont have to much of a clue

Do i _need_ 6in splits in the front? just they cost a bit more.. and the installations double the cost of the 6inch

what sort of sub should i get then? cheap wise.. im not after anything fance, just want it to sound better then stock

also.. with the door panels, is there anyway you can make it so you can "see" the speakers? just for the visual side of things

PS: got the old stock HU (tape/cd) if anyone wants its up for grabs, just pay the postage or pick it up (QLD/Kallangur)

I also was wondering if you could show the speakers for the visual side of things to ha ha!
Can anyone help us out there?

 

[garfa]

unless you know how to fiberglass, then no.
custom pods need to be built to replace the original mapholders.