Welcome to Just Commodores, a site specifically designed for all people who share the same passion as yourself.
VT Transmission sump
- Thread starter jazmyn88
- Start date
db_notso
diagnostic technician...
- Joined
- Oct 2, 2010
- Messages
- 979
- Reaction score
- 8
- Points
- 0
- Age
- 37
- Location
- sunshine coast, qld
- Members Ride
- vt v6, mods(susp brakesetc...)
I believe from memory they are a different depth...
Hence different filter and gasket????
To be honest though i have never held the two up side by side and compared them~!
Hence different filter and gasket????
To be honest though i have never held the two up side by side and compared them~!
jazmyn88
New Member
- Joined
- Dec 19, 2010
- Messages
- 10
- Reaction score
- 0
- Points
- 0
- Age
- 36
- Location
- Ipswich
- Members Ride
- VT Commodore
ok thanx..
Someone threw a metal pole out there window when i was driving on the hiway and the metal pole bounced under my car and hit my transmission sump and periced it.
I have heaps of VS transmission sumps laying around home and if they were the same i was goin to put the VS transmission sump in instead of buyin a new one.
Someone threw a metal pole out there window when i was driving on the hiway and the metal pole bounced under my car and hit my transmission sump and periced it.
I have heaps of VS transmission sumps laying around home and if they were the same i was goin to put the VS transmission sump in instead of buyin a new one.
db_notso
diagnostic technician...
- Joined
- Oct 2, 2010
- Messages
- 979
- Reaction score
- 8
- Points
- 0
- Age
- 37
- Location
- sunshine coast, qld
- Members Ride
- vt v6, mods(susp brakesetc...)
just went and looked at mine and neighbours cars they are different heights
so im pretty sure the filters are different too~!
so im pretty sure the filters are different too~!
wortus
Active Member
- Joined
- Dec 2, 2009
- Messages
- 1,885
- Reaction score
- 22
- Points
- 38
- Location
- Sydney
- Members Ride
- VY Series 2 25th Anniversary in Phantom Mica
you may be able to fit the VS sump if a VS filter fits and the bolt holes are in the same place however you'd reduce the service interval back to that of a VS. You may also need to look at the dip stick incase it is too long for the VS sump?