Umai Naa!!
R.I.P APY-88V :(
- Joined
- Jun 17, 2006
- Messages
- 195
- Reaction score
- 1
- Points
- 0
- Age
- 39
- Location
- Sthn H'Lands, NSW, Aust.
- Website
- www.aus12.org
- Members Ride
- VR S1 Exec. A4 3.8L
Selling the following, due to aborting the project, after writing it off.
Genuine VT Clubby plastic rear bar. Not cut for towbar, good condition, no cracks. It's in Tiger Mica, but it's been knocked about, so a respray would be a good idea - $150
VT/VX V8Supercar-style front bar. Never fitted, still in primer, good condition - $200
Genuine VT Senator sedan boot spoiler. LED intact, mounts broken off (Only a matter of glassing new studs into it), and some marks in surface from when it hit the deck when it came off the car - $60
LS1 Genuine Holden Clutch plate. Friction plate, only. Brand new, never fitted, comes with brand new spiggot bearing - $120
VX SS Genuine Holden Fog Light. Brand new, still in box, never fitted, comes with new globe -$50
VT S2/VX S1 Factory Alarm. Complete kit, brand new, still in box, to suit level 2 BCM, wiring, etc - $120
If there's anything else, I'll add it. I'll put pics up of everything in the next day or two.
The front and rear bars, and rear spoiler are pick-up only, due to size, but I'm happy to send everything else.
Everything is located in the Southern Highlands of NSW, roughly 45mins south of Campbelltown, down the M5/Hume HWY.
Contact via replying here, PM-ing me, or shooting me an email (address is in my profile).
Genuine VT Clubby plastic rear bar. Not cut for towbar, good condition, no cracks. It's in Tiger Mica, but it's been knocked about, so a respray would be a good idea - $150
VT/VX V8Supercar-style front bar. Never fitted, still in primer, good condition - $200
Genuine VT Senator sedan boot spoiler. LED intact, mounts broken off (Only a matter of glassing new studs into it), and some marks in surface from when it hit the deck when it came off the car - $60
LS1 Genuine Holden Clutch plate. Friction plate, only. Brand new, never fitted, comes with brand new spiggot bearing - $120
VX SS Genuine Holden Fog Light. Brand new, still in box, never fitted, comes with new globe -$50
VT S2/VX S1 Factory Alarm. Complete kit, brand new, still in box, to suit level 2 BCM, wiring, etc - $120
If there's anything else, I'll add it. I'll put pics up of everything in the next day or two.
The front and rear bars, and rear spoiler are pick-up only, due to size, but I'm happy to send everything else.
Everything is located in the Southern Highlands of NSW, roughly 45mins south of Campbelltown, down the M5/Hume HWY.
Contact via replying here, PM-ing me, or shooting me an email (address is in my profile).
