vx plug help

[l67-v6]

Need help with round plug shown in picture?
Need to know which wires are for the neutral safety start switch because
we are doing a manual swap l67?

 

[lout]

none, round plug is for shift solenoids
prndl neutral safety switch is square 8pin? 6 pin

 

[l67-v6]

Do we need any of the wires in the round plug for a manual swap?
Is the 8pin neutral safety switch part of the engine harness?

 

[lout]

no you dont need any of the round plug pins
i thought it was in the same loom as the round plug

 

[Lex]

no you dont need any of the round plug pins
i thought it was in the same loom as the round plug

If its the same as the vt v6. Its a 4 wire block plug. I think its on the other side of the round plug wire & would plug into the neutral safety switch? Which is located on the gear selector rod on the passenger side of the transmission.

Assume the other wire goes to the pcm?

 

[l67-v6]

Does anyone know what these plugs are?
Is the 4 plug the safety switch for the auto?

 

[lout]

none of those
top connector is for neutralpark and reverse
bottom connector is for dash prndl display

4l60e Neutral Safety Switch Diagram | CPT 4l60e

4l60e neutral safety switch wiring diagrams and connector pin out information.

cpt4l60e.com

 

[Lex]

Heres a pic of the location of the neutral safety switch.
Grab all your plugs & see which one fits?

It'll fit in the top socket.

 

[l67-v6]

this the engine harness number.

do the neutral safety switch.
and all the gearbox plugs into the big round plug?

 

[lout]

the big round plug IS ONLY FOR TRANSMISSION INTERNAL SOLENOIDS
the neutral safety switch is a square 6 pin plug