Aaron96
New Member
- Joined
- Feb 20, 2024
- Messages
- 1
- Reaction score
- 0
- Points
- 1
- Age
- 27
- Location
- Victoria
- Members Ride
- Vz clubsport and vx commodore
So I’m building a Vx v6 skid car, few things I’ve already done but I am stuck on wiring up the thermos. Basically I want to try and keep everything as factory as I can, I followed a post about splicing into pin f6 at the pcm but I don’t have the pin out there. Am I missing something or is it a different pin location?
Secondly I then attempted to tap into the bottom of my high speed relay with no luck with any configuration of wiring, I managed to light up the switch and also managed to blow the bcm fuse (fixed now).
I do not care if I wire up both fans, or just the high speed, I just want a fan on a switch without rewiring a whole circuit when everything is already there. If any one has any wiring diagrams for a 2002 vx v6 that may even help me too
Secondly I then attempted to tap into the bottom of my high speed relay with no luck with any configuration of wiring, I managed to light up the switch and also managed to blow the bcm fuse (fixed now).
I do not care if I wire up both fans, or just the high speed, I just want a fan on a switch without rewiring a whole circuit when everything is already there. If any one has any wiring diagrams for a 2002 vx v6 that may even help me too