abcjoyride
New Member
- Joined
- Aug 28, 2023
- Messages
- 5
- Reaction score
- 0
- Points
- 1
- Location
- New Zealand
- Members Ride
- Vy berlina series 2 LN3
Hi,
Just replaced the carsTail shaft hanger bearing. VY berlina series 2 4 speed auto v6. I marked it up the tailshaft prior to separating so i could reassemble to maintain the balance of the shaft.
I have re assembled the same way i took it apart and pretty sure ive assembled correctly.
However now i have a vibration which starts at about 70kph and remains thru til 100-105. (Havnt been faster so not sure if it stops).
The vibration comes on at the same speed when coasting down a hill in gear.
No vibration under acceleration up to 70kph. No vibration under 70kph while driving.
Anyone know what may be causing this and a possible fix? Only started since replacement.
Thanks
Just replaced the carsTail shaft hanger bearing. VY berlina series 2 4 speed auto v6. I marked it up the tailshaft prior to separating so i could reassemble to maintain the balance of the shaft.
I have re assembled the same way i took it apart and pretty sure ive assembled correctly.
However now i have a vibration which starts at about 70kph and remains thru til 100-105. (Havnt been faster so not sure if it stops).
The vibration comes on at the same speed when coasting down a hill in gear.
No vibration under acceleration up to 70kph. No vibration under 70kph while driving.
Anyone know what may be causing this and a possible fix? Only started since replacement.
Thanks