PeterVZ
New Member
- Joined
- Mar 4, 2019
- Messages
- 3
- Reaction score
- 0
- Points
- 1
- Age
- 54
- Location
- Sunbury Victori9a
- Members Ride
- VZ Commodore Berlina
Hi,
Just wondering if anyone can help out there. I've got a VZ Berlina and until recently has been running good and then all of sudden it starts running rough on idle when its cold. The shaking was pretty bad and here is what Ive done to try and fix it (some recommended by Holden Mechanic as well):
1. All new injectors.
2. Put in a new ECU (coded by Holden)
3. Put in a new Coolant Temperature Sensor
4. Put in new air hoses
The throttle body looks clean, I've disconnected the battery.
Its still running rough on cold start up but after a short time runs better than it did before.
The only error code it has had since is P2100 and since then i have the Safety Mode signal come up. Im at a lose what is wrong with it?
Just wondering if anyone can help out there. I've got a VZ Berlina and until recently has been running good and then all of sudden it starts running rough on idle when its cold. The shaking was pretty bad and here is what Ive done to try and fix it (some recommended by Holden Mechanic as well):
1. All new injectors.
2. Put in a new ECU (coded by Holden)
3. Put in a new Coolant Temperature Sensor
4. Put in new air hoses
The throttle body looks clean, I've disconnected the battery.
Its still running rough on cold start up but after a short time runs better than it did before.
The only error code it has had since is P2100 and since then i have the Safety Mode signal come up. Im at a lose what is wrong with it?