vscalais951
Member
- Joined
- Apr 19, 2011
- Messages
- 108
- Reaction score
- 1
- Points
- 16
- Location
- Central Coast
- Members Ride
- 99 VS Ute V6 Auto
UPDATE!!!
I went for a good drive today down to my nans and back (45mins each way) and the car drove fine on the way down, didnt have a problem at all, but on the way back just after i left nan's house the engine light came on, i decided to just keep goin and see how it goes. The tacho was bouncing like the other day even though the revs were steady, the temp gauge stopped working and the instantaneous fuel reading wasnt working and like the other day the first thing to happen was the fan cut in 1 minute after start up, the car itself drove perfectly, except for the parts of the dash that werent working you wouldnt even be able to tell there was an issue, about half way home the engine light turned off and all the dash started working again and the fan went back to operating normally and it was perfect the rest of the way home. When i got home i turned the car off and checked the error codes and this time it showed code 36 (vacuum leak) and code 92 (low speed fault). So im thinking the low speed fan fault might be the relay or something? and ill have to go and get it checked for a vacuum leak or is there i simple way i can do it at home?
I went for a good drive today down to my nans and back (45mins each way) and the car drove fine on the way down, didnt have a problem at all, but on the way back just after i left nan's house the engine light came on, i decided to just keep goin and see how it goes. The tacho was bouncing like the other day even though the revs were steady, the temp gauge stopped working and the instantaneous fuel reading wasnt working and like the other day the first thing to happen was the fan cut in 1 minute after start up, the car itself drove perfectly, except for the parts of the dash that werent working you wouldnt even be able to tell there was an issue, about half way home the engine light turned off and all the dash started working again and the fan went back to operating normally and it was perfect the rest of the way home. When i got home i turned the car off and checked the error codes and this time it showed code 36 (vacuum leak) and code 92 (low speed fault). So im thinking the low speed fan fault might be the relay or something? and ill have to go and get it checked for a vacuum leak or is there i simple way i can do it at home?