M#ick2183
Donating Member
- Joined
- Dec 28, 2017
- Messages
- 266
- Reaction score
- 837
- Points
- 93
- Age
- 41
- Location
- Mackay
- Members Ride
- Vt wagon, vt hsv xu8,vs hsv senator,vs ss ute
Hi good folks and the rest of us, just picked up a cheap 03 vy Ecotec ute. It was an auto from factory but someone has put a 5 speed in.
Now it has check engine light on so scanned it and is given me every auto gearbox code(p0713,p0740,p1860,p0756),
clear them and come straight back.
The Ecu part number in it is :92118883
Identifier:0131
When I google search that part number,it seems as if only auto ecu's seem to come up?
It runs like normal (bar codes and holds about 1000 rpm for second or two after reving, haven't checked cable etc yet)
Do I need to program with tech2 or do I have an auto ecu?
Any help/advice would be greatly appreciated cheers folks
Now it has check engine light on so scanned it and is given me every auto gearbox code(p0713,p0740,p1860,p0756),
clear them and come straight back.
The Ecu part number in it is :92118883
Identifier:0131
When I google search that part number,it seems as if only auto ecu's seem to come up?
It runs like normal (bar codes and holds about 1000 rpm for second or two after reving, haven't checked cable etc yet)
Do I need to program with tech2 or do I have an auto ecu?
Any help/advice would be greatly appreciated cheers folks