Which ecu????

[M#ick2183]

Hi good folks and the rest of us, just picked up a cheap 03 vy Ecotec ute. It was an auto from factory but someone has put a 5 speed in.
Now it has check engine light on so scanned it and is given me every auto gearbox code(p0713,p0740,p1860,p0756),
clear them and come straight back.
The Ecu part number in it is :92118883
Identifier:0131
When I google search that part number,it seems as if only auto ecu's seem to come up?
It runs like normal (bar codes and holds about 1000 rpm for second or two after reving, haven't checked cable etc yet)
Do I need to program with tech2 or do I have an auto ecu?
Any help/advice would be greatly appreciated cheers folks

 

[lowandslow]

Get a manual tune put in it or find a manual vy v6 ecu and bcm and fit

 

[M#ick2183]

Get a manual tune put in it or find a manual vy v6 ecu and bcm and fit

Rodger thank you ,will see which one I can find cheaper as I'm not planning on keeping it at this stage

 

[M#ick2183]

Just a follow up, got a ecu for $90 out of a manual,linked them with my vident i400 scan tool,no more codes and drops it's revs like normal. thanking lowandslow for the advice greatly appreciated