Search results

Ohk sweet thanks bro, do you buy them dogleg/ piggy back tabs, or u made it?? thanks for help

Thanks bro Very helpful Ppreciate G!!

Wtf is a dog leg?? I wanna do it professionally not drill holes in fuse box All I wanna know is where the F37 wire runs to an area where I can access it

Where is the wiring harness but? I looked around he fuse box and I could t find anything ????

Nah bro I multimeters F37 and it gives me ignition power, "HVAC Ignition" I just need a connection point to splice in my wire.. I thought about taking the fusebox out and doing it from the bottom, but too much work compared to followibg the wire and doing it at a connection So do u know where...

Thanks bro, appreciate it Thought the ignition coul would be more than 10A

Where does that fuses wire run to?? Can't connect my wire onto the fuse box. Does don't think it runs to the ignition coil, it's only 10 amps??

Thanks man got it, but where does that wire run to somewhere I can tap into it??

On the left hand side o the engine bay right next to the fuse box I need ignition on power, where can I get it

thanks boys

Yoyoyoyyoyoy Looking at rims to buy but there's all these widths, idk Wat they mean? I'm looking at 20" KMC 775 Rockstars but it has these sizes 20x8, or 20x10 etc..... Which ones do I need for them to fit on my car Thanks bro

Whats the pocket in the centre dash? the power source needs to go to the engine bay, so it would be easier to find some ignition on power inside the engine bay. Probs jus multimeter the **** out of every plug until i get power, turn off key and see if it drops.

could u be more specific?? i dont know wat u mean bro

I also need to get power when the ignition is turned on. Which part of the loom is best to tap into for this? easier to open the fusebox with multimeter/test lamp and find an ignitionon wire and connect it to that? just didnt want to draw too much current out of one lead and keep blowin fuses...

got it anyways, the grommet under the wiper motor goes straight through to the top of the accelerator pedal, just running it under carpet/trim

Nah I got manual, where's the passé her side grommets?? They heaps easier? I took a grommet that was by itself out on the drivers side right under the wiper motor, I don't know where it goes, I'll try find it but if passenger side is easier then I'll have a look where?? Thanks

Yo I'm trying to find a place on my VE SV6 to run some small wires through. I've had a look in the engine bay an seen where some other looms have gone in but I don't wanna touch them. The wires need to go to the center console/ under driver seat area, so where the easiest grommet to access...

thanks boys, might go with black :)

Black SV6 Future black rims, thinking red would look nice. others seem to think it will look gay, maybe im a little fu*ked and dont get it but i think it will be sweet as fu*k in red Anyone doned this before? suggestion help etc etc do your thing Booooom ppreciate

no budget, i got cash ;) for real? i actually thought companies made all types of different custom body kits.

Are u serious... Is there anyware u can get good looking bumpers like this anyway??

NAhhhhhh bro i already looked on SSV they dont have it like the photo????

yoyoyoyoyoooooooooooooooooooooo So i wanna get a look at the aftermarket bumpers and **** they make somewhere for VE SV6 Where do i look for them? a website or a shop somewhere (Melbourne Bro) i want to get this exact one, cause its... sick as bro::

Thanks for all your help, ill get that then, be sweet. the gain info is helpful too, thanks cuz

Ive posted this link many times, but i still dont see wats wrong with it, it will be cheaper and easier for me to put on... XFORCE TWIN 2.25" CAT BACK EXHAUST VE V6 COMMODORE SV6 | eBay

thanks brah, so how do i know what the gain should be at for this to never happen again?? I am going to buy a much better sub anyways, something thats still 12" but much more RMS to stay on the safe side, cause i blast it everyday an you recommend any brands that are good quality and ok price...

ohk i will get the 2.25" cat back

Hello I have just blown my sub. I need help in finding what went wrong and what i need to fix the problem. My sub was a: - Kicker 12" CVR12 2 Ohm Sub im pretty sure its 450W RMS AMP is: - Alpine MRX-M50 Mono amp, 500W RMS 2 ohm I think its probs because my Sub is 450W RMS and my mono apm...

I agree with you, a P plater driving a clean SV6 compared to a VN with cut springs.. Ive driven next to many cops, even with removed rear wing, SSV tail lights and pumping bass and they dont care. My only worry was, if there is that 1 pig who does pull me over and see i have this, i want to...

Thanks for the negative support from some of you... i thought if i ask stupid questions i look stupid, but if i dont i stay stupid. thanks for your useless comments Xonar, i fight haters like you. Good work I am saving money until i finish this stupid P system to fully upgrade my car, or...

hmm true, i thought about just the redback reat bolt ons. and true the pacies will be probs better combination than a $900 cat back I have a really bad feeling that the pacies will be P plate illegal. all this P plate bullshit is hard to understand but im sure a pig wont see pacies??

Yooooo I am a Red P player in VICTORIA and want to know if an exhaust (2.25" catback) is considered illegal and will get me in jail? I know that they do increase performance do I was thinking its might be bad Thanks for ur help Jus commodores

Ohk thanks for your help bro I'm gonna go with the 2.25, I also have manual but gettin 2.25.. Most likely goin with the eBay one, it's $300 cheaper for the Xforce compared to his $900 redback for the same 2.25 cat back. And soon after I will get pacemaker headers, heard a lot of positive ****...

Do you know if it's p plate legal?? Will I be screwed if a cop pulls me over?

is the same system but for $300 cheaper?? Is Xforce better than Red Back I think i will buy this system.. Anyone see why i shouldnt? im no expert but this looks like what i need.. XFORCE TWIN 2.25" CAT BACK EXHAUST VE V6 COMMODORE SV6 | eBay ALSO!!!!!!! I AM A RED P PLATER IN...

Local exhaust guy said a 2 1/4 catback system will sound nice without drone. Its a Redback for $900 free fitting. im scared getting the 2.5" i saw one recently and it just sounded like ****... what your thoughts?

so its a standard factory exhaust from an SS V8 in 2.5" I can buy them in cat back? Wont the be more expensive because their genuine holden? bus as long as i get some sort of good quality 2.5" system, it should be the same stuff pretty much?? jus a 2.5" pipe. Also, do you have headers? i...

i dont understand this.. is this a 2.5"?? XForce. Performance Mufflers, Exhaust Systems & Accessories. Commodore VE SV6

i think the 2.5 sounds better. probs get one of them. how much did yours cost??

does smaller or larger sound better?? i understand v6 should be 2.25 of 2.5 max. what is the actual .25 difference in sound/ flow anything???