Search results

I don't think I used clips or tape, just screwed it down, the inside the boot you will see holes to drill through. I Haven't had any leaks.

Every time the car starts something in the middle of the console taps/knocks for about 5 seconds. Annoying as hell. I think it may have initially started when switching the windscreen demister on. Anyone had a similar issue?

I'm not too far from Narrandera and I know the heat and wind you were referring to. I fly rc planes but only ones you buy then build. If anyone is keen on it jump onto hobbyking.com pretty cheap these days.

I'm just about to look at the mother inlaws 98vt. She had radiator replaced recently then took it back because it all leaked out. Now she has spent around a grand and said its starting to overheat especially when the aircon is on. I swapped plugs last night to see if the other fan works and it...

At the end of the day it's just plastic regardless of the expensive badges on the car. If you like the look an cant afford an expensive car that loses so much of your $$$ over the years then stick a spoiler on here or there. I like the look of clubsports and I don't mind seeing more on the road...

I didn't worry on mine. Because it is lower you will scrape more around town so the extra flex without having the brackets could be a good thing. Mine hasn't budged in 6 months, hope that helps

Replace it with a lip spoiler like the senator use. $200 on eBay from memory

Won't sit lower. I put them on my omega and of anything raised the front slightly

How do you know when to replace them? Is it noisy or does the handling tend to go and make the car feel like a boat when cornering? And is there usually a common amount of k's when they need replacing?

Do you know some cars don't have dipsticks? Apparently they have been made redundant as there is already one behind the wheel

I did mine a couple of months ago. When I need it done again I will get the mechanic to do it. You will need a handy tool to remove rear bolt under plenum

Just straight up get the software. I did and it worked out fine "knock on wood" car drives really nicely and no more chimes. And especially after I got the seatbelt extension. I hate dings in the commodore.

Do you want me to show you a picture Davey?

I have recently upgraded Omega suspension with a spring & shock set straight out of a clubsport. With 18" sv6 wheels. The ride is definitely stiffer and I'm possible thinking of putting the springs back on from the omega. They are same height but softer spring. Not sure if people recommend that...

I have managed to fit the new suspension on to my Omega. It's actually second hand 06 r8 socks and springs. I did the front sat arvo and it felt better handling wise and smooth then the next day I fitted the rear suspension but have found it to really harden the ride now. Can really feel the...

gday mate, I just installed the hsv shocks into my car.. Where did you get the switch for the mrc? My rear end is probably to tight and wondering if the switch helps or if it just firms it up even more. Cheers

Salute I have done my callipers metallic Blue. I will get a pic across to you

Tint cost $6 a metre. Do the maths.

I'm throwing some hsv shocks on my omega today. I don't wanna affect ride hight because my hsv front spoiler sits so low already. However I'm hoping this stiffens the front end but not to much as its only a v6 and I don't hav the extra weight of the v8. Will let you know how it goes. Total price...

How much did you pay?

Look on eBay to buy someone's old fe2. Normally lads remove them when they buy the car new and lower it pretty quick. Worth a try if your trying to save pennies

Guys if you know how to use a blade then order the tint online from protint and mix some dish washing detergent to make the film solution and apply it yourself. Very easy to do. You will need patience tho

Good work mate. I will be doing mine this week. How long did it take you?

Can this be done on any model ve?

Thanks Vongy I will take your word on that. Would anyone like me to make a short video how to do it? I will try one side and get it right them film the other side for anyone else wanting to know how to remove and install new suspension on a VE

I had this problem guys and I researched long and hard even the American sites and I came to the conclusions the sensors are set to tight and throwing codes off. I had the software update a couple of months ago for $250 including a vim connector and since then it has driven smoother the gear...

Has anyone swapped over complete suspension on a VE without using compressors. I searched for this and I found some info on the vt/vu which some people say yes and some say no. In my situation the new suspension is out of an R8 and the coils are still on the struts locked into place, so I'm...

Is anyone looking to sell fe2 shocks and springs? I'm keen to stiffen the omega up without dropping into much.

It's for a sedan too. Cheers

DESCRIPTION: Wanted to Buy ITEM: Full set of ve fe2 suspension or just the struts without springs. Looking for someone who has lowered their car or have upgraded there SV6 for an example. Im wanting to upgrade my Omega suspension without going to low. LOCATION: Wagga Wagga NSW...

Thank you for the in-depths of knowledge you have Sean. So body roll comes down to shocks/struts rather then stiffer springs. That's good to know. I have some springs from a friends ve e series (clubsport I think) Was going to try them with standard struts at front but if it doesn't help with...

What happens if you put weight in the back?

Im wanting to have a slighly sportier feel without dropping it too low. The front end sits quiet low as it is with the clubsport nose. Im wondering wether anyone on here is wanting to sell old fe2 if they are dropping their car on it guts with kings/munroe combo.