tim_pato
New Member
- Joined
- Jun 14, 2013
- Messages
- 266
- Reaction score
- 0
- Points
- 0
- Location
- Tamworth
- Members Ride
- daily-5.0 5spd vr ss clubodore, project-74 lh rana
Motor had 256 thou on it ,not terribly well looked after. Cylinder was only honed, deburred with a ridge reamer, precision engineering Hypatec flat top pistons, I reseated the Valves by hand, first attempt at a rebuild.I've done 1500 klms since I rebuilt the motor. Compression test is as follows on psi from cylinder 1 not in firing order....
174
170
163
163
162
178
165
165.
The motor is fairly chewing the oil. 1.5 litres over the 1500 klms. No valve stem seals on the inlet valves. There Ferrea Valves and didn't have seals on them when I dismantled it or anywhere to put them. Thoughts?
Opinions please.
174
170
163
163
162
178
165
165.
The motor is fairly chewing the oil. 1.5 litres over the 1500 klms. No valve stem seals on the inlet valves. There Ferrea Valves and didn't have seals on them when I dismantled it or anywhere to put them. Thoughts?
Opinions please.