[VZ] Save your SS seat bolsters from getting squashed

[derrro]

Cheers for the tut. Will def do this.

Do you have to do anything to stop faults being logged etc when unplugging the airbag?

Yes, don't key on. If you want to be extra sure, disconnect the battery and turn on the head lights.

Is there any trick to the rear plastic covers? I can't get one of mine back on.

The rear covers next to the prop shaft housing (the bump) are held on with metal clips attached to the plastic. You can use a bit of force on these. The door side plastic is clipped over the ends of the seat rails - if you manoeuvre it about a bit it will come free. As it's plastic, don't use force.

 

[derrro]

Thanks for the pics, just need to find the time now.

You can knock it off in a day. Going slow, starting at abt 10am, you should be finished at the latest 3pm

 

[derrro]

Cheers for the tut. Will def do this.

Do you have to do anything to stop faults being logged etc when unplugging the airbag?

Is there any trick to the rear plastic covers? I can't get one of mine back on.

Re fault codes you will need to use a diagnostic tool to clear em

 

[derrro]

I can do it for you

Happy to do this procedure for you if ur in Sydney. Just PM me to org

 

[caprice V]

Anyone See a reason why this would not be very similar on the Caprice V?
I did see a post here some where to buy from skinny owners if only i had headed this advice

 

[derrro]

Anyone See a reason why this would not be very similar on the Caprice V?
I did see a post here some where to buy from skinny owners if only i had headed this advice

Never done a VE before but I imagine it to be pretty much the same

 

[Wogboy1994]

dam derro you are hairy.

if i get this vy ss i might have to use this guy cos the drivers eat is a little worse for wear.

 

[derrro]

dam derro you are hairy.

if i get this vy ss i might have to use this guy cos the drivers eat is a little worse for wear.

Haha I'm a MAN!

 

[jeffhigh]

What extra is involved if you replace the seat foam with a new one, how do you fit the cloth to it?

 

[acarmody]

What extra is involved if you replace the seat foam with a new one, how do you fit the cloth to it?

A light fabric glue, like a spray on would be ideal.