What are VYs' wheel alignment settings? (toe, camber, caster, axis)

[VRSS]

Also minutes are each increment of a degree. 60 minutes to a degree

 

[freefallin]

They will drive well and wear tyres well between 0-1 degree front camber, 1.5-3mm total front toe in.
If your rear cambers are below -1.5 degree your doing well. With roughly same toe settings as the front. They will always wear inner edges on the rear, regular rotations are a must

Thanks for the info VRSS!

Are these settings for 15 or 16 inch wheels?
My rims are 16". Tires 225/55 (225/55/16)

 

[VRSS]

No worries They'll be fine for your 16s. I run my VX at similar settings and I have 20 inch wheels.

 

[freefallin]

No worries They'll be fine for your 16s. I run my VX at similar settings and I have 20 inch wheels.

Ok! Good to know that.

One more thing, i just remembered the toe in they aligned my car to. It was left 0/3 right 0/3 total 0/6.

A little confused. What does the 0 stand for?

 

[Loki]

need to do mine as well the are running low on the inside