PlenumBiscuit
Well-Known Member
- Joined
- Dec 22, 2010
- Messages
- 1,391
- Reaction score
- 147
- Points
- 63
- Location
- Adelaide
- Members Ride
- VY Commodore
Im near pulling the door moulds off and attacking the sikaflex
I did it on my VS so ive been through the hell before
I got an interesting idea of using a "hot knife" i reckon it would slice the sika like butter
They seem hard to find. Theyre an actual tool you can buy i think they cut fabric and foam
Anyone know where to get a sort of tool like this
Another trick is to attach a razor blade on the end of a soldering iron
Any risk of melting the paint work here
Else im gonna put double masking tape on either side of the sika and then slide a sharp chisel or blade through it
I know that if u can get then sika thin enough it will rub off with heat and wax grease remover
I did it on my VS so ive been through the hell before
I got an interesting idea of using a "hot knife" i reckon it would slice the sika like butter
They seem hard to find. Theyre an actual tool you can buy i think they cut fabric and foam
Anyone know where to get a sort of tool like this
Another trick is to attach a razor blade on the end of a soldering iron
Any risk of melting the paint work here
Else im gonna put double masking tape on either side of the sika and then slide a sharp chisel or blade through it
I know that if u can get then sika thin enough it will rub off with heat and wax grease remover